Root's
Log in
Features / Monitoring
20+ parameters · every 15 minutes

Everything happening in the field — on one screen

Soil, climate, weather and groundwater from all plots are collected in the dashboard automatically — without manual measurements or trips.

20+
environmental parameters
15 min
data interval
< 1 %
measurement loss
Field No. 3 · Tomatoes
Normal
Soil moisture
31 %
▲ 4 %
Soil temp.
21,3 °C
▼ 0,8
Illuminance
42 000 lx
▲ 12 %
Soil moisture, 7 days
Sensors on the plot
Field module #12
98 %
Weather station
91 %
Groundwater sensor
Low battery
Field module #07
Normal
Rainfall
4.2 mm
Updated
2 min ago
next in 13 min
WHAT WE MEASURE

A full picture of the environment on every plot

The sensor set is chosen for the crop and the farm’s task

Soil

Moisture and temperature at 2–3 depths, electrical conductivity and pH — to irrigate and feed based on facts, not the calendar.

Microclimate

Temperature, air humidity, VPD and dew point — for greenhouses and protected cultivation.

Weather on the plot

Your own weather station: rainfall, wind, solar radiation.

Groundwater

Groundwater level over time — for orchards and reclaimed fields.

Illuminance

Light intensity and the daily sum — for supplemental lighting and forecasts.
24/7

System status

Charge, connection and health of every module — you can see where a visit is needed.

Charts and comparison

Trends by plot and season, Excel export in one click.
PLOT ANALYTICS

Eight tabs under the plot map

The tab is active if a suitable sensor is installed on the plot. The filters — period, metric, crop, sensors — are the same as for the heat map.

Weather
Soil
Groundwater
Diseases
Combined
Measurements
Equipment
Grid setup

Weather

Air temperature and humidity, pressure, wind speed and gusts, rainfall, UV index, illuminance.

Lines over time, rainfall as bars, a wind rose

Soil

Soil temperature and moisture, electrical conductivity, pH, nitrogen, phosphorus, potassium.

Line over time

Groundwater

Temperature or moisture at different depths from one sensor.
“Depth × time” heat map with a scale

Diseases

Probability of diseases and stresses over a period; a reference sheet for each disease.
Probability line over time

Combined metrics

Sum of active temperatures (degree days).
Cumulative line

Measurements

Manual measurements on the plot.
Table and chart with a forecast

Equipment

The plot’s devices and sensors with charge and status.
Tree list

Grid setup

Field layout parameters: azimuth, row and plant spacing.
Form
EQUIPMENT

What is connected to what — shown as a tree

Status “Running”, “Paused”, “Discharged” or “Low battery” and the charge level of each device; on the plot map — with their own icons.

Head module HM-01
Field No. 4
Running
86 %
Field module FM-03 · 8 ports
Running
64 %
Soil sensor · 30 cm
moisture, temperature
Soil sensor · 60 cm
moisture, temperature, pH, NPK
Field module FM-04 · 4 ports
Low battery
18 %
Air and light sensor
temperature, humidity, illuminance
Weather station WS-1
Field No. 4
Running
91 %
Irrigation system module (GSM)
Field No. 2 · works without the head module
Pause
52 %
01

Add a device

By serial number and secret key; give it a name and description.
02

Link to a plot

To the farm and plot (field module — to the head module) and place a point on the map.

03

Connect the sensors

To ports: choose a free sensor or create a new one, specify the type and depth.

04

Detached — the ports are free

The device and its sensors are disconnected, the ports are freed.
HOW IT WORKS

From sensor to decision — four steps

1

Modules on the plots

They poll the sensors every 15 minutes and store up to 60 days of data without a connection.

2

Connection without internet

LoRa up to 3 km to the gateway or directly over the cellular network.
3

Solar panel

Autonomous operation all season — no sockets, no battery changes.
4

Data in the dashboard

Charts, comparisons and notifications on your phone and computer.
20+
environmental parameters in one dashboard
15 min
data update interval
< 1 %
lost measurements
60 days
data storage without connection
FAQ

Frequently asked questions

Didn’t find an answer? Write to us on Telegram — we reply within an hour.

Do I need internet in the field?

–

No. Field modules send data over the LoRa radio channel to the head module, and it sends it to the server over the 2G/4G cellular network.

A digital tool for growth

Helps you manage the farm, save resources, streamline processes, grow faster and control the harvest without extra effort

Open the demo